Syndeo Plug and Play 24V 60 LEDs 4.8w p/m LED Tape, Warm White 3000K, IP20 (5m Reel)

This robust tape can be cut to any desired length at any of the allocated cut points, and can be extended if required. The Green 24V Syndeo Plug and Play tail on each end ensures you can use two runs of our tape with our 24V Syndeo Plug and Play drivers, minimising waste. If there is a requirement for the strip tape to be cut into several sections we also offer additional plug & play snap connectors to accompany this.

*Please Note: Compatible with the 24V Syndeo Plug and Play Multiport Driver and Components only and not the Ready to Connect Multiport Driver or Components.

Maximum runs of up to 8 metres can be achieved with this tape before visible voltage drops occur.

Syndeo Plug and Play 24V LED Strips use a more efficient 2835 chip, producing more lumens per watt than old style legacy strip lights currently offered in the mass market today.

24V strip tape works from a 240v mains circuit when being powered by a compatible transformer. Alternatively, the strip units can be wired to a dedicated 24V DC circuit without the need for a transformer.

To guarantee the highest efficiency, we advise that you change your existing transformers to LED Drivers guaranteeing compatibility.

Dimming Compatibility

• Compatible with dimmers using standard control protocols including DMX, Dali, 0-10V, PWM.
• Compatible with smarthome dimmers including those from Lutron, Loxone, Rayco, Control 4, Lightwave, Wizz, Casambi, Crestron.